Eagle IntelliMap 320, Инструкция по установке и эксплуатации

Страница: 49 / 128

43
Navigate to a Point of Interest
For POIs that are in view on the map, you can easily use the Navigate
to Cursor command above; just use the cursor to select the POI.
The other method involves searching for POIs with the Find Waypoint
command, launched with the
WPT
key. (See the searching example ear-
lier in this section, or turn to Sec. 6, Searching , for detailed instructions
on POI searches.)
After you have looked up an item with the Find Waypoint command,
use the
→
to make sure the
G
O
T
O
command is highlighted at the top of
the screen, then press
ENT
. The unit begins showing navigation infor-
mation to the item.
To cancel navigation, press
MENU
|
MENU
|
↓
to
C
ANCEL
N
AVIGATION
|
ENT
|
←
to
Y
ES
|
ENT
. The IntelliMap 320 stops showing navigation information.
Creating and Saving a Trail
A trail, or plot trail, is a string of position points plotted by the unit as
you travel. It's a travel history, a record of the path you have taken.
Trails are useful for repeating a journey along the same track. They are
particularly handy when you are trying to retrace your trip and go back
the way you came. On the screen, trails are represented by a solid line
extending from the back of the current position arrow.
The IntelliMap 320 is set at the factory to automatically create and rec-
ord a trail while the unit is turned on. The IntelliMap 320 will continue
recording the trail until the length reaches the maximum trail point
setting (default is 2,000, but the unit can record trails 9,999 points
long). When the point limit is reached, the IntelliMap 320 begins re-
cording the trail over itself.
By default, the trail flashes once a second, making it easier to see
against the background map. With the default auto setting, this unit
creates a trail by placing a dot (trail point) on the screen every time you
change directions. (The methods used for creating a trail and the trail
update rate can both be adjusted or even turned off. See Section for 5
for
Trail Options .)
To preserve a trail from point A to point B, you must "turn off" the trail
by making it
inactive before heading to point C or even back to point A.
When the current trail is set inactive, the IntelliMap 320 automatically
creates and begins recording a new trail.
To Save a Trail
1. Press
MENU
|
MENU
|
↓
to
M
Y
T
RAILS
|
ENT
.