background image

1

Introduction

Thank you for buying an Eagle

 sonar! Your unit is a high-quality so-

nar designed for both professional and novice fishermen. All Eagle so-
nars have an automatic mode that finds and displays the bottom, fish,
underwater structure and more – right out of the box. All you have to
do is press the on (

PWR

) key.

However, if you want to fine-tune your unit, press the 

MENU UP

 key.

The FishEasy

 2 family has several powerful features you can control

by scrolling through easy-to-use menus with the arrow and menu keys.

To get started with your Eagle sonar, first read the installation section.
It contains instructions for mounting the sonar unit, the transducer
and any optional accessories, such as a speed sensor.

Following recommended installation practices will pay off in optimum
performance of your Eagle sonar. Improper installation can cause
problems down the road, especially if the transducer is badly mounted.

After you've read the installation instructions, install the unit and ac-
cessories. Then, read the rest of the manual. The more you know about
your sonar, the better it will work for you.

Take advantage of the Simulator feature. It allows you to practice oper-
ating your sonar before you get it in the water. And when you finally
head for your favorite fishing hole, take this manual along for reference.

Capabilities and Specifications: FishEasy 2 Family

General

Case size:

......................... 5.2" H x 5.4" W x 2.6" D (13.2 cm H x 13.6 cm

W x 6.6 cm D) sealed, waterproof; suitable
for saltwater use.

Display:

............................ High-contrast Film SuperTwist LCD; 4.0"

(10.2 cm) diagonal viewing area.

Resolution:

...................... 240 pixels (vert.) x 160 pixel (horiz.) resolu-

tion; 38,400 total pixels

Backlighting:

.................. Backlit screen and keypad for night use.

Input power:

................... 10 to 17 volts DC.

Current drain:

............... 300 ma lights off; 400 ma lights on.

Back-up memory:

.......... Built-in memory stores sonar settings when

unit is turned off.

Содержание FishEasy 2T





































































Отзывы:

Похожие инструкции для FishEasy 2T