Eagle 2000F Series, Руководство по эксплуатации

Страница: 25 / 49

- 25 -
5.3 Turntable Home Switch
BE SURE TO DISCONNECT POWER AND AIR SUPPLY TO THE
MACHINE PRIOR TO ANY MAINTENANCE WORK
Fig. 4-1 Fig. 4-2
Turntable

Remove the six M10 flat head cap screws in the turn table.

Screw in one M10 eyebolt rated for lifting into the tapped hole in the turn plate. Lift the turn table
using a hoist and chain rated for a 500lb load.
(See Fig. 4-1)

Lift the turntable just clear of the frame and use the forklift to remove the table. For safety
reasons, keep the disk low to the ground.

Lubricate the chain and gears. Inspect the items and clean out any debris.

The chain and gears need lubricated every three months.
(See Fig. 4-2)
Pre-Stretch Film Carriage
Fig. 4-3 Fig. 4-3

Lubricate the drive chain of the carriage on a monthly basis.
(See Fig. 4-3)