![Eagle Tree Systems Guardian ET-GUARD Скачать руководство пользователя страница 7](http://html1.mh-extra.com/html/eagle-tree-systems/guardian-et-guard/guardian-et-guard_instruction-manual_3300585007.webp)
Copyright © 2011 Eagle Tree Systems, LLC
7
http://www.eagletreesystems.com
Issue: The message "Stabilizer Disconnected!" appears on the video screen during OSD Pro startup.
Solution: This message indicates that the Guardian Expander is not detected by the system. Check your connections on the Guardian expander, and read further
troubleshooting steps below.
Issue: Guardian does not seem to be working correctly and the Guardian’s status LED IS flashing rapidly.
Solution: Make sure you have updated the OSD Pro, eLogger and Guardian firmware as described above.
Issue: Guardian does not seem to be working correctly and the Guardian’s status LED IS NOT flashing rapidly.
Solution: Make sure that the Guardian is connected correctly to the LCD/TX line on your eLogger and that your eLogger is powered. If the Guardian’s status LED is
blinking three times in a repeating fashion, then your unit has likely been damaged.
Issue: Servo deflections are limited, compared to when Stabilization is disabled.
Solution: Run the Servo Analysis Wizard under the Configure Radio Control menu. Make sure to assert full stick deflections when asked to turn and climb during the
wizard. See the section on the Servo Analysis Wizard under Guardian Stabilization.
Issue: Elevator or ailerons are unresponsive to radio commands
Solution: Make sure you have run the Servo Analysis Wizard after installing Guardian.
Issue: Servos are responding to control inputs, but not to movements of the airplane.
Solution: Ensure that the Guardian’s 4 pin cable is connected as described in the Connection and Mounting section above. Check that “Stabilizaton/Elevn Mixing On?”
is set to “YES” under the Configure Radio Control menu. Confirm that the Pitch, Roll and Overall Gains are set to their default values. If you are using the Aux2 input
for Overall Gain adjustment, ensure that your knob, switch, or slider is positioned to enable stabilization.
Issue: Heading Hold does not appear to be working or is drifting more than a few degrees per second.
Solution: If you have trimmed your airplane recently, you may need to execute the “Reset Cruise Sticks/Throtl” command under “Configure Radio Control.” The
Heading Hold feature only engages when your Roll command is very close to level flight. (Less than ~15% stick deflection)
Limited Warranty
Eagle Tree Systems, LLC, warrants the Guardian to be free from defects in materials and workmanship for a period of one (1) year from the date of original purchase.
This warranty is nontransferable. If your unit requires warranty service during this period, we will replace or repair it at our option. Shipping cost to us is your
responsibility. To obtain warranty service, email
for further instructions.
This limited warranty does not cover:
•
The Software. See the Software license agreement for more information on Software restrictions.
•
Problems that result from:
o
External causes such as accident, abuse, misuse, or problems with electrical power
o
Servicing not authorized by us
o
Usage that is not in accordance with product instructions
o
Failure to follow the product instructions
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE (OR
JURISDICTION TO JURISDICTION). OUR RESPONSIBILITY FOR MALFUNCITONS AND DEFECTS IN HARDWARE IS LIMITED TO REPAIR AND
REPLACEMENT AS SET FORTH IN THIS WARRANTY STATEMENT. ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED IN TIME TO THE TERM OF THE LIMITED WARRANTY PERIOD AS DESCRIBED ABOVE. NO WARRANTIES, WHETHER EXPRESS OR
IMPLIED, WILL APPLY AFTER THE LIMITED WARRANTY PERIOD HAS EXPIRED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG
AN IMPLIED WARRANTY LASTS, SO THIS LIMITATION MAY NOT APPLY TO YOU.
WE DO NOT ACCEPT LIABILITY BEYOND THE REMEDIES PROVIDED FOR IN THIS LIMITED WARRANTY OR FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY LIABILTY FOR THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES, FOR
PRODUCTS NOT BEING AVAILABLE FOR USE, OR FOR LOST DATA OR LOST SOFTWARE. OUR LIABILITY WILL BE NO MORE THAN THE
AMOUNT YOU PAID FOR THE PRODUCT THAT IS THE SUBJECT OF A CLAIM. THIS IS THE MAXIMUM AMOUNT FOR WHICH WE ARE
RESPONSIBLE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.