ASSEMBLY INSTRUCTIONS
Gowning Benches with Undershelf
—72˝ in length
Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group. ©2007 by the Eagle Group
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: 302/653-3000 • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: 302/653-2065
(End)
Please note:
72˝-long gowning racks come with SIX posts and TWO wire undershelves.
The enclosed S-hooks will therefore be required to complete assembly.
undershelf
post
split
sleeve
corner
collar
post
undershelf
post
Step 2 - Mount
first undershelf.
split
sleeves
Step 3 - By repeating Steps 1 and 2,
attach second undershelf to the two
remaining posts.
Step 4 - Connect second
assembly to first assembly.
NOTE: Place each “S” hook near a
post as closely as possible.
second
assembly
“S” hook
first
assembly
“S”
hook
Step 5: Secure undershelves.
Note: Do NOT hammer directly on
wire or corner.
Tap with
rubber
mallet.
Place board
across shelf
corners.
Step 1 - Attach split sleeves (for first
undershelf) to lowest groove on four posts.
• The wider part of the taper goes toward the bottom.
• Make sure rib on split sleeve is seated into a groove
on the post.
Step 6: Attach seat to posts.
Refer to
Step 4
on reverse page.
Assembly is complete.
Please note:
If additional
undershelves were
ordered, install
now
by repeating
Steps 1 through 5,
attaching split
sleeves onto middle
of posts. Otherwise,
proceed to Step 6.
Step 7: Secure
feet to the floor.
Hardware not
included.
