BMS-icom Installation Manual
13
6. Communication Setup
The BMS icom can communicate directly to a server PC or over a network for remote
monitoring of battery systems. The following steps will provide the correct workflow for
connecting the BMS icom to a PC or network.
Step 1: Cable Connection to Computer/Network
Parts:
BMS MPU, Ethernet Cable
Tools:
N/A
The MPU communicates directly to a computer or network using TCP/IP over Ethernet cable
connection.
(1) Connect Ethernet Cable to BMS
1. Plug the Ethernet cable into the TCP/IP port on the side of the MPU
2. Do not use the RS-232 or RS-485 ports for communication
3. Connect the other end of the Ethernet cable to the computer or network
4. Flip the power switch to “ON”
