EAE EE-6603BWF, Инструкция по установке, эксплуатации и ремонту

Страница: 15 / 40

Installation, Operation and Parts Manual
EE-6603BWF
15
OPERATION INSTRUCTIONS
5.1 Precautions
5.1.1 Check all the joints of oil hose. Only when there is no leakage, the lift can start work.
5.1.2 The lift, if its safety device malfunctions, shall not be used.
5.1.3 The machine shall not lift or lower an automobile if its center of gravity is not positioned midway of the rising platforms. Otherwise,
the manufacturer as well as the dealers will not bear any responsibility for any consequence resulted thereby.
5.1.4 Operators and other personnel concerned should stand in a safety area during lifting and lowering process.
5.1.5 When platforms rise to the expected height, turn off the power to prevent any wrong operation done by unconcerned people. If
necessary, lock the switch with a padlock.
5.1.6 Make sure the safety lock of the lift is engaged before start working under the vehicle and no people under the vehicle during lifting
and lowering process.
5.2 Control panel descriptions
Pos. Name Function
FA Alarm buzzer Safety descent warning
SB1 UP button Control the rising movement
SB2 DOWN I button Control the initial lowering movement
SB3 DOWN II button Control the final lowering movement
SB4 Safety lock button Engage the safety locks
SB Emergency stop Stop power in emergency cases
HL Power indicator Show if power is on
SA1 Selection switch Select working or levelling mode
SA2 Selection switch Select main lift or wheel free lift
QS Main switch Power on /off