1264C User Manual
Chapter 2
CONFIGURING THE 1264C
Using This
Chapter
This section includes basic procedures to install and configure the
1264C mainframe. Use this chapter to:
•
Review installation site considerations.
•
Install VXI modules or optional card guide covers and
blanking plates.
•
Connect the chassis/safety ground.
Installation and configuration information for optional
equipment is provided with the option.
AC Mains Power
When the standard 1264C is shipped, it is configured for 120 VAC
operation. Voltage selection switch S400 is set to the 115VAC
position.
Should it be necessary to replace the AC mains fuse (F400), refer
to Chapter 5: Removal and Replacement of the AC Mains Fuse.
NOTE:
Ordering Option 71 (P/N 407676) configures the 1264C for
applications powered by 230 VAC power. The voltage
selection switch S400 is set to the 230VAC position, a 6.3A
Slo-Blow fuse is installed into F400, and an international
power cord (P/N600858) replaces the domestic cord.
Site
Considerations
The 1264C Mainframe is designed to be used freestanding (bench
top) or in an instrument rack. Refer to
Figure 1-5
for vent
locations for the 1264C.
EADS North America Defense
Configuring The 1264C 2-1
Test and Services, Inc. © 1998
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
