Installing the Propellers
Refer to the illustration for the proper motor rotation and propeller location.
The propellers are press fit onto the motor shafts. Remove the propellers by pulling the
center hub straight up away from the motor.
Install the propellers by pressing the center hub over the motor shaft, being careful not
to press it too far down on the shaft. The propeller and motor should spin freely when
installed correctly.
Installing the Transmitter Batteries (RTF)
The LED indicator flashes and the
transmitter beeps progressively faster as
the battery voltage drops.
Replace the transmitter batteries when
the transmitter begins to beep.
Install the Flight Battery
CAUTION:
Always disconnect the Li-Po battery from the aircraft when not flying
to avoid over-discharging the battery.
Содержание M80
Страница 1: ...M80 INSTRUCTION MANUAL...