Eachine M80, Инструкция по эксплуатации

Страница: 14 / 16

Does not function and
smells burnt after
connecting the flight
battery
Flight battery connected
with the wrong polarity
Replace the 3-in-1 board.
Connect the flight battery
noting proper polarity
LED on receiver flashes
rapidly and quadcopter will
not respond to transmitter
(during binding)
Transmitter too near
aircraft during binding
process
Power off the transmitter.
Move the transmitter a
larger distance from the
aircraft.
Disconnect and reconnect
the flight battery to the
aircraft. Follow the binding
instructions
Bind switch or button
was not held while
transmitter was powered
on
Power off transmitter and
repeat bind process
Aircraft or transmitter is
too close to large metal
object, wireless source
or another transmitter
Move aircraft and
transmitter to another
location and attempt
binding again
LED on the receiver
flashes rapidly and the
quadcopter will not
respond to the transmitter
(after binding)
Low voltage of the
transmitter batteries
Replace the transmitter
batteries
The quadcopter is bound
to a different model
memory
Select the correct model
memory on the
transmitter.
Disconnect and reconnect
the flight battery to the