e2v UNIIQA+ 16k CL, Руководство пользователя, Страница: 47 / 50

® 16k CL
47
UM 16kCL – REVC – 11/14
e2v semiconductors SAS 2014
12.7 Save and Restore
Feature Commands Description
UserSetLoad r rcfg Get the current user configuration bank (saved or restored)
w rcfg <val> Restore current UserSet from UserSet bank number <val>, from 0 to 5; <val>
comes from UserSetSelector.
UserSetSave w scfg <val> Save current UserSet to UserSet bank number <val>, from 1 to 5; <val> comes
from UserSetSelector. 0 cannot be saved. 5 (Integrator) can’t be saved in
User mode
UserSetControl Xml virtual
RestoreLUTFromBank r rlut Get the current LUT bank (saved or restore)
w rlut <val> Restore current LUT from LUT bank number <val>, from 1 to 4; <val> comes
from LUTSetSelector.
SaveLUTToBank w slut <val> Save current LUT to LUT FFC bank number <val>, from 1 to 4; <val> comes
from LUTSetSelector.
RestoreFFCFromBank r rffc Get the current FFC bank (save or restore)
w rffc <val> Restore current FFC (including FPN and FFCGain) from FFC bank number
<val>, from 1 to 8; <val> comes from UserFFCSelector (XML feature).
SaveFFCToBank w sffc <val> Save current FFC (including FPN and FFCGain) to FFC bank number <val>,
from 1 to 8; <val> comes from FFCSelector (XML feature).
12.8 Camera Status
Feature Commands Description
PrivilegeLevel r lock Get camera running privilege level
0 = Privilege Factory
1 = Privilege Advanced User
2 = Privilege User
ChangePrivilegeLevel w lock 1 Lock camera privilege to “Advanced User”
w lock 2 Lock camera privilege to “User”
w lock <val> Unlock camera privilege depending on <val> (min=256; max=2
32
-1)
DeviceTemperature
r temp Read Mainboard internal temperature (format signed Q10.2 = signed 8 bits,
plus 2 bits below comma. Value from -512 to +511) in °C
DeviceTemperatureSelector
Xml Virtual
Standby r stby Read Standby state (CMOS sensor)
w stby 0 Disable standby mode (“False”)
w stby 1 Enable standby mode (“True”), no more video available but save power and
temperature
r stat Get camera status (see below for details)
StatusWaitForTrigger Bit 0: true if camera waits for a trigger during more than 1s
Satus trigger too fast Bit 1: true if camera trigger is too fast
StatusWarningOverflow Bit 8: true if a an overflow occurs during FFC calibration or Tap balance
(available only for integrator/user mode)
StatusWarningUnderflow Bit 9: true if a an underflow occurs during FFC calibration or Tap balance
(available only for integrator/user mode)
Cc3 Scrolling direction Bit 11: 0 : forward, 1: reverse
StatusErrorHardware Bit 16 : true if hardware error detected
12.9 communication
Feature
Commands Description
ComBaudRate r baud Get current baud rate (This feature is not saved in camera)
w baud 1 Set baud rate to “9600Bds”
w baud 2 Set baud rate to “19200Bds”
w baud 6 Set baud rate to “57600Bds”
w baud 12 Set baud rate to “115200Bds”