European Safety Systems Ltd.
Impress House, Mansell Road, Acton, London W3 7QH
www.e2s.com
Tel: +44 (0)208 743 8880
Document No. D210-00-211-IS
Issue 5
12-09-2022
Sheet 2 of 6
3. Marking & Rating Information
The BExBG10D-P & BExBG15D-P comply with the following
standards for hazardous locations:
3.1 ATEX / IECEx & UKEx Ratings
Standards
EN60079-0:2018/IEC60079-0:2017
(ed.7):
Explosive
Atmospheres - Equipment General Requirements.
EN60079-1:2014/IEC60079-1:2014
(ed.7):
Explosive
Atmospheres - Equipment Protection by Flameproof Enclosures
“d”.
EN60079-31:2014/IEC60079-31:2013
(ed.2):
Explosive
Atmospheres - Equipment Dust Ignition Protection by enclosure
“t”.
Model No:
Rating
BExBG10D-P
/
BExBG15D-P
Ex db IIC T4 Gb Ta. -50°C to +70°C
Ex tb IIIC T99°C Db Ta. -50°C to +40°C
Ex tb IIIC T114°C Db Ta. -50°C to +55°C
Ex tb IIIC T129°C Db Ta. -50°C to +70°C
See Product table for electrical ratings of each unit model
Certificate No.
KEMA 00ATEX2006X
IECEx KEM 10.0002X
UL22UKEX2636X
Epsilon x
Equipment Group
and Category:
II 2G
II 2D
CE Marking and
Notified Body No.
2813
UKCA Marking and
Approval Body No.
0518
4. Zones, Gas Group, Category and
Temperature Classification
The units can be installed in locations with the following conditions:
Area Classification Gas
Zone 1
Explosive gas air mixture likely to occur in normal
operation.
Zone 2
Explosive gas air mixture not likely to occur in
normal operation, and if it does, it will only exist for
a short time.
Gas Groupings
Group IIA
Propane
Group IIB
Ethylene
Group IIC
Hydrogen and Acetylene
Temperature Classification for Gas Applications
T1
450
o
C
T2
300
o
C
T3
200
o
C
T4
135
o
C
Area Classification Dust
Zone 21
Explosive dust air mixture likely to occur in normal
operation.
Zone 22
Explosive dust air mixture not likely to occur in
normal operation, and if it does, it will only exist for
a short time.
Dust Groupings
Group IIIA
Combustible Dusts
Group IIIB
Non-Conductive Dusts
Group IIIC
Conductive Dusts
Equipment Category
2G, 2D
Equipment Protection Level
Gb, Db,
Maximum Surface Temperature for Dust Applications
99°C at +40°C
114°C at +55°C
129°C at +70°C
Ambient Temperature Range
-50°C to +70°C Gas Groups IIA, IIB and IIC
-50°C to +70°C Dust Groups IIIA, IIIB and IIIC
IP Rating
IP66/67 to EN/IEC60529 and
IP6X to EN/IEC60079-0, EN/IEC60079-31
The beacon must only be installed by suitably qualified personnel in
accordance with the latest issues of the relevant standards:
EN60079-14 / IEC60079-14: Explosive atmospheres - Electrical
installations design, selection and erection
EN60079-10-1 / IEC60079-10-1: Explosive atmospheres -
Classification of areas. Explosive gas atmospheres
EN60079-10-2 / IEC60079-10-2: Explosive atmospheres -
Classification of areas. Explosive dust atmospheres
The installation of the beacon must also be in accordance with any local
codes that may apply and should only be carried out by a competent
electrical engineer who has the necessary training.