E2S BExBG10D-P, Инструкция по эксплуатации, Страница: 1 / 12

INSTRUCTION MANUAL
BExBG10D-P & BExBG15D-P
Xenon Beacon
ATEx/IECEx & UKEx Gas & Dust
European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880
Document No. D210-00-211-IS Issue 5 12-09-2022 Sheet 1 of 6
BExBG10D-P / BExBG15D-P
1. Product Table
Unit Type Code
Nominal
Input Voltage
Nominal
Input Current
Max I/P Voltage
BExBG10DPDC012 12Vdc 1.45A 14V
BExBG10DPDC024 24Vdc 660mA 28V
BExBG10DPDC048 48Vdc 340mA 54V
BExBG10DPAC115 115Vac 250mA 126V
BExBG10DPAC230 230Vac 110mA 253V
BExBG15DPDC024 24Vdc 860mA 28V
BExBG15DPDC048 48Vdc 480mA 54V
BExBG15DPAC115 115Vac 360mA 126V
BExBG15DPAC230 230Vac 170mA 253V
It is important that a suitable power supply is used to run the equipment. The power supply selected must have the necessary capacity
to provide the input current to all of the units.
The above table shows the input current taken by the various beacons and shows the maximum voltage at which the beacons can be
operated:
The input current will vary according to the voltage input level.
2. Warnings

DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT

DO NOT OPEN WHEN ENERGIZED

POTENTIAL ELECTROSTATIC CHARGING HAZARD – CLEAN ONLY WITH A DAMP CLOTH

COVER BOLTS CLASS A4-80

USE HEAT RESISTING CABLES AND CABLE GLANDS (RATED 110°C) AT AMB. TEMPERATURES OVER
40°C