Tel : 0044(0)2087438880 mail : [email protected] Fax : 0044(0)2087404200 web : www.e2s.com
IN
S
T
A
L
L
A
T
IO
N
IN
S
T
R
U
C
T
IO
N
S
24vdc : 10 - 30vdc
A105N APPELLO
- Synchronised Voice Annunciation
& 10 Tone Sounder
144,00
130,00
Ø7,00
13
0,
00
13
3,
50
126,00
-
+
T2
Stage 2
For instructions relating to the recording of the voice messages please see the A105N SYNCHRONISED
APPELLO PROGRAMMER instructions.
In order for this sounder to remain synchronised with other Appello Synchronised units, the settings
must be identical (with the exception of volume) and they must be activated simultaneously.
DAMAGE WILL OCCUR TO THE UNIT IF THE SUPPLIED VOLTAGE IS NOT W ITHIN THE LIMITS
SPECIFIED.
TONE SELECTION.
•
If a tone is required in addition to the voice message position connectors on pin rows
T T
as shown
in the tone table. (Tone 10 is Factory setting).
•
If a second and/or third stage tone is required there are 3 tones available for each first stage tone.
Position connectors on pin rows
2
and
3
as shown in the tone table to select one of the 3 tones for
each stage.
MESSAGE MODE SELECTION.
•
The Synchronised Appello offers a choice of 3 message mode options.
•
Option ‘A’ will play the selected tone, then play the message. The sequence is then repeated.
(Factory setting)
•
Option ‘B’ will play the selected tone, followed by the message twice. The sequence is then
repeated.
•
Option ‘C’ will repeatedly play the message only.
•
Position connectors on pin row
M
to select an option.
VOLUME CONTROL.
•
There are 3 levels of volume available. Potentiometer P1 may also be used for further adjustment.
•
Option ‘A’ : Maximum 50mA @ 24vdc
•
Option ‘B’ : Maximum 80mA @ 24vdc (Factory setting)
•
Option ‘C’ : Maximum 130mA @ 24vdc
•
Position connectors on pin row
M H
to select an option.
•
Pin row ‘
L
’ is not used.
M
Option 'A'
M
Option 'B'
M
Option 'C'
M
H
M
H
M
H
Option 'A'
Option 'B'
Option 'C'
T2 -
2
Option 'A'
2
Option 'B'
2
Option 'C'
T3 -
3
Option 'A'
3
Option 'B'
3
Option 'C'
T3
Stage 3
Stage 1
Frequency
T2 & T3 Stage Options
Tone
Description
'A'
'B'
'C'
T
Tone 1
420Hz @ 0.625 sec Australian Alert
Tone 5
Tone 8
Tone 4
T
T
Tone 2
500/1200Hz @ 0.3Hz 0.5 sec Slow Whoop
Tone 10
Tone 8 Tone 12
T
T
Tone 3
2400/2900Hz @ 7Hz Sweeping
Tone 8 Tone 14 Tone 10
T
T
Tone 4
500-1200Hz 3.75sec /0.25sec. Australian Evac.
Tone 1
Tone 8
Tone 5
T
T
Tone 5
Bell
Tone 10 Tone 13 Tone 2
T
T
Tone 6
1200/500Hz @ 1Hz - DIN / PFEER P.T.A.P.
Tone 13
Tone 2 Tone 10
T
T
Tone 7
544Hz (100mS)/440Hz (400mS) - NF S 32-001
Tone 10
Tone 5
Tone 9
T
T
Tone 8
1000Hz Continuous - PFEER Toxic Gas
Tone 10 Tone 11 Tone 5
T
T
Tone 9
554Hz Continuous
Tone 5
Tone 7 Tone 12
T
T
Tone 10 800/1000Hz @ 0.25 sec Alternating
Tone 8
Tone 6 Tone 11
T
Tone 11 1000Hz @ 1Hz Intermittent
Tone 12 2400Hz Continuous
Tone 13 800Hz Continuous
Tone 14 2400/2900Hz @ 1Hz Sweeping
T
T
L
M
2
3
Factory Setting
Réglage en us ine
Werkseinstellung
Impostazione di fabbrica
Ajuste de fábrica
Ajuste de fábrica
Fabriksindstilling
Fabrieksinstelling
Fabrikkinns tilling
Fabriksinställning
