e2-Live Home Automation
Edit by Shine Lo
8
3.
Plug in the device corresponding position, adjust to detect the right current consumption when
power on and off.
Appliances and iPower control location setting is complete and correct detection from the current
adjustment, to make sure correct linking function be executed from RP-20..
Specifies light fifth zone 1-7 for power detection position.
For example:
1. Connect to PC with RP-20 via USB, open RP-20 software, checking COM connection.
2.
RP-20 software provides two places available to transfer ID code
(1) Home page: power control coding. The mode is not accept “All off”.
Illustrated as follows
(2)
Control Validation
：
in ” light & curtain” select accept “All off” or not accept “All off”.
3. In setting mode
(1) Press and hold
(2) poke the tact switch in setting hole, red LED light on
4. Using RP-20 home page to transfer code, as shown below (
一
)
Using
Control Validation/ Light & Curtain to transfer code
，
as shown below(
二)，step3~5
5.
iPower received , red LED quick flashing means setting successfully.
Press and hold
(1)
Setting stick or paper
clip poke the tact
switch in (2)
Red LED light on
(2)
