Cleaning & maintenance
1. Cleaning and maintenance of your microfiber pads
- Read the maintenance instructions for the microfiber pads:
- Wash below 40 ° C (104 ° F).
- Do not bleach.
- Do not use fabric softener.
- Do not tumble dry.
- Do not iron.
- Do not dry clean.
- Clean after each maintenance of your windows.
Please contact a reseller or the brand to purchase other microfiber pads.
For optimal cleaning, it is recommended to change your consumables every 6 months.
2. Replace the tank.
- Use a Phillips screwdriver to unscrew
The reservoir.
- Disconnect the cable from the old tank,
then drag it to extract it.
- Connect the new tank to the robot,
slide it back, then tighten the screw.
Maintenance frequency:
when the ultrasonic
nozzle is blocked and cannot spray water.
Please contact a local dealer or local
authorized dealer for other consumable
spare parts.
3. Replace the ultrasonic spray nozzle :
- Follow the instructions above to detach
The reservoir.
- Slightly lift the silicone ring and remove it from the tank.
Do not press on the welding spot and / or the ultrasonic
nozzle.
- Place the new ultrasonic spray nozzle on the tank,
make sure the connection cable is aligned near the side
of the tank, then install the bottom of the silicone ring
on the tank.
- Press the silicone ring to fix it, then use another finger
to press the top of the silicone ring lightly into the tank.
- Check that the new ultrasonic spray nozzle is properly
fitted to the tank.
- Connect the new tank to the robot, slide it back, then
tighten the screw.
Maintenance frequency:
when the ultrasonic nozzle is
blocked and cannot spray water.
Contact a local dealer or the brand for other spare parts.
EN
