3
HOW TO SET UP
INSTRUCTIONS
STEP 1
STEP 2
Please read each step before you attempt to set up. Save these instructions
for future reference.
NOTE - First time top and frame attachment is required
Top and frames are shipped separately to avoid damage. A first time set up
requires that the main frame and sub frame be assembled together and the top
to be attached to the frame. This first time will take longer than future set ups.
Once top is permanently attached to frame, set up and take down can be easily
accomplished within minutes.
With a partner, gently expand the main
frame and sub-frame to approximately
half of its fully opened position. Face
open ends of trusses toward each other.
Attach the main frame to the sub-frame
at four points. The outside end of each
truss is marked with either an “A” or a
“B” label. Locate these labels as well as
the “A” “B” labels on the main frame
angle brackets. Attach “B” truss to the
adjoining “B” endcap with the bolts and
tools provided. Attach eyelet of cable as
shown. Tighten the bolts securely. Do not
over tighten bolts - ensure they can still
rotate easily. Repeat this procedure for
the “A” label.
Main
Frame
Sub
Frame
