E-Z-GO ST SPORT, Руководство пользователя и сервисное руководство

Страница: 44 / 84

Page 24
OPERATION AND SERVICE INFORMATION
Repair and Service Manual
Read all of Section B and this section before attempting any procedure. Pay particular attention to all Notes, Cautions and Warnings.
B
Fig. 35 Oil Viscosity Chart
If vehicle is to be stored over winter months, it can be stored
with old oil left in engine. The oil should be changed as part of
spring maintenance. This will remove any moisture that has
accumulated during storage.
Be aware that engine fluids may be hot and
contact to the skin may cause severe burns.
Wear rubber gloves to protect skin from expo-
sure to the old oil and degreaser.
The oil should be changed with engine warm. Park vehicle on a
level surface, engage parking brake and remove key. Place a
drain pan under engine. Wipe top of the engine clean with a
cloth (Ref. Fig. 36 on page 24). Remove the oil fill cap.
Fig. 36 Cleaning Top of Engine
Clean the area around filter. Using a filter wrench, strap
wrench or other suitable wrench (A), remove the filter
(B) from the engine and allow the oil to drain. The ‘O’
rings may remain on engine (A) or filter (B) (Ref. Fig. 37
on page 24)
Fig. 37 Remove Oil Filter
Inspect the filter. Make sure the ‘O’ ring is not left on the
engine surface.
Fig. 38 Inspect Oil Filter
Be careful of hot oil when drained. It may be
hot enough to burn you severely
Drain the oil by removing the drain plug found at the
rear of the engine base. Remove using a 3/4" wrench.
At the first oil change,
small metal chips and lint may be
found. This is normal, resulting from the break-in period.
Inspect the filter at every oil change. The presence of
large metal chips could indicate possible damage to the
engine.
-20 0 20 40 60 80 100
-30 -20 -10 0 10 20 30 40
C
F
0
0
10W-30 10W-30
10W-40 10W-40
HEAVY DUTY WORK
LIGHT DUTY WORK
(AIR TEMPERATURE)
10W-30 10W-30
Oil Fill Cap