11/43
GM DCBS EL-52800
User Manual / Ref. MAN_DCBS_GM_EN_V1.0
Initial Setup
2/4
BATTERY CABLE CLAMPS CONNECTION ////////
Remove the battery cable clamps from the box to connect them through the
connector in the rear of the DCBS Trolley.
POWER CABLE CONNECTION AND POWER ON ////////
Input power information
Voltage
100 – 240 V
Frequency
50/60 Hz
Consumption
2 kW Maximum
Connect the power cord to the connector located on the back of the DCBS, then
connect the opposite plug to a standard electrical socket. Switch on the device by
setting the switch to the “I” position.
Table of Contents
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Safety Reminders
Appearance and Dimensions
Trolley LED’s
Remote Presentation
Remote Job Storage
Accessories
Battery Cable Clamps Connection
Power Cable Connection and Power On
BAC Input
Wi-Fi Connection (Remote to Trolley Only)
The Main Menu
Vehicle Selection from Database
Manual Selection of Battery
Remote Diagnostic
PDI Test
Trolley Diagnostic
Charge
Load Test
Reserve Capacity Test
History
Settings