10/43
GM DCBS EL-52800
User Manual / Ref. MAN_DCBS_GM_EN_V1.0
Initial Setup
1/4
INSTALLATION ////////
The unit needs to be placed in a clean, dry and ventilated area.
Tools necessary to assemble trolley:
- 4mm Allen Wrench, 10mm Socket/Wrench. (Step 3, use long screws)
- 3mm Allen Wrench. (Step 4, use short screw)
Once the unit is out of the box, the next step is to connect the docking station
to the trolley.
Then install the remote clamps hook and install the printer and the paper.
To use the remote by itself, connect the clamps on the side of the remote.
1.
3.
5.
2.
4.
6.
Table of Contents
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Safety Reminders
Appearance and Dimensions
Trolley LED’s
Remote Presentation
Remote Job Storage
Accessories
Battery Cable Clamps Connection
Power Cable Connection and Power On
BAC Input
Wi-Fi Connection (Remote to Trolley Only)
The Main Menu
Vehicle Selection from Database
Manual Selection of Battery
Remote Diagnostic
PDI Test
Trolley Diagnostic
Charge
Load Test
Reserve Capacity Test
History
Settings
