User's Manual
EW-M48
8
Headrest Adjustment
：
By pressing (k) to adjust the headrest (J) up & down to a comfortable position.
(J)
(L)
(K)
(F)
(G)
(H)
Figure 9
Figure 10
OPERATING YOUR SCOOTER
Before beginning your journey with your new power chair, make sure power chair is on
a level surface and clear of any obstacle. Although your power chair is able to climb slopes,
it is safer to practice on a leveled surface.
1.Before operating with your power chair, check the following:
•
free-wheeling lever is on D.
•
speed dial is at the lowest speed (fully turned counterclockwise).
2.Sit on chair and fasten seat belt.
3.When power is turned on, all battery gauge LED lights should be lit lighting. The self-
diagnostic warning lights should not be blinking.
4.While resting your arm on armrests, joystick should be within reach. By pushing joystick
slightly forward, power chair will move forward slowly, and pushing joystick fully forward,
chair will move at normal speed. And adjusting speed dial will also decrease or increase
speed. Also, with joystick, you are able to turn chair in 360
o
. When joystick is let go and
back in center position, chair will stop.
5.Practice driving where there is no obstacle. Start at slowest speed and move forward
and backward; make some turns. As you get more comfortable, you can increase the
speed by turning speed dial knob clockwise.
Figure 12
Figure 11
Seat Adjustment
：
By lifting up lever (L) to rotate seat (See Fig. 12)
Note: Do not swivel seat angle over 90 degrees,
to prevent wires twist.
While standing up, avoid stepping
on footplate as it may cause injury.
•
Use your power chair only where it is safe to walk.
•
Drive in low speed when reversing, riding downhill on ramp or curb or on uneven surface.
Keep in mind these rules
：
