EW-18
Page
4
of
13
That the throttle stop operates properly and that the throttle cable or other linkages be
adjusted properly;
That the steering linkage is adjusted and operates properly;
That the motor key switch is properly functioning;
That all guards and pads originally supplied by the manufacturer are in proper place on the
scooter an in serviceable condition;
That the area that the scooter is to be operated in is safe and suitable for scooter operation;
That, on those scooters equipped with restraints, such restraints are in good condition,
functioning properly, and used appropriately;
That the braking system on the scooter is functioning properly;
That all axle guards, chain guards, torque converter covers, or other covers or guards supplied
by the manufacturer are in place and in serviceable condition;
That tires are in good condition, inflated properly, and have sufficient tread remaining; and
That all fasteners are in place and tightened properly.
No person shall allow hands, feet, hair, body parts, clothing, or similar articles to come in
contact with moving parts of the scooter, wheels or drive train.
Do not operate your scooter if hair, clothing, or other articles can extend past the scooter seat
back or under the scooter’s wheels.
Do not operate your scooter while smoking.
The owner shall provide continuous supervision during scooter use.
Scooter shall operate only on recommended surfaces or terrain.
Scooter shall not be operated on roads, streets, highways, or at any other location where road
vehicles are intended to travel.
Scooter shall be operated only with adequate lighting and under conditions of suitable visibility.
Scooter shall be used by the operator only, passengers are not permitted.
Scooter operators always shall use appropriate protective clothing, including but not limited to a
helmet and eye protection, with appropriate certification, and any other equipment
recommended by the scooter manufacturer.
No operator shall contact any portion of the motor, wheels, or drive train for any purpose
including maintenance until the scooter is turned off, the key is removed, and parts have
allowed cooling, and the scooter is in a stable and stationary position.
