EW-18
Page
12
of
13
To clean your scooter uses a damp cloth with a mild, non-abrasive cleaner on the plastic and metal
parts. If necessary, clean your scooter with an approved disinfectant safe for use on your unit.
WARNING
–
Never hose off your scooter or expose it to direct contact with water.
WARNING
–
Never use any chemicals on the upholstery of your seat, this may cause the seat to dry out
and crack.
IX. INSPECTION & MAINTENANCE
DISPOSAL OF YOUR SCOOTER & PARTS
You must follow applicable local and national regulations when disposing of your scooter, or defective
scooter parts. Contact your local waste agency, recycling center, or E-Wheels for information on proper
disposal.
The following conditions may indicate a serious problem with your scooter. Contact E-Wheels if one of
the following conditions occurs:
Motor or gearbox noise
Frayed electrical harnesses
Cracked or broken connections
Uneven wear on the tires
Veering to one side
Bent or broken wheel assemblies
Will not power on
Loose seat or seat components
MAINTENANCE SCHEDULE
Inspect your scooter routinely for service issue or wearable items.
INSPECTION DAILY WEEKLY MONTHLY
Inspect the throttle is not bent when in neutral or rest position.
Inspect electrical harnesses are not frayed or have exposed wires. Check for flat spots on tires
Inspect seat, armrests, and frame for loose hardware or damage
Inspect batteries are free from corrosion
Inspect all harnesses to the controller are securely fastened
Check the brakes for functionality at lowest speed setting
Check the anti-tip wheel for wear, and contact with the ground while at rest
Check for sufficient tread on the tires
Check for proper tire inflation, if applicable to your scooter
