Place a small amount of grease on the thread before installing.
Install Pedals and Tighten Crank.
Ensure you clearly identify Right and Left pedals by the R or L stamped on the end of the pedal shaft.
Right Pedal Screws in clockwise.
Identification is very important because the Left Pedal has a reverse thread.
Left Pedal is a reverse thread
and screws in anti-clockwise.
Tighten with a pedal spanner or 15mm spanner.
Remember Right Pedal Tightens Clockwise Left Pedal Tightens Anti Clockwise.
Remove Plastic chrome cap on crank and check tightness with 14mm socket. Both Left and right hand sides.
Pedal Assist On-off Button: Switch from
Electric Power to Pedal Assist Mode.
Shimano Thumb Shifter (7 speed) Derailleur
Battery Condition Indicator lights
Please loose this screw to
adjust the height of handle
bar
Quick Release for
Motor cable
