4-7
ᛀྒྷտ૿൷ᙰ
ᛀྒྷտ૿൷ᒵ
Ꮪ।൷ᙰ
ᦀ೯ᕴ൷ᙰ
USB
൷ᙰ
DRIVER
CONT
1. Testing: Lev Interface (testing interface)
Testing interface software
Panel
connector
List the all possible causes according to trouble-
shooting and be sure to check and confirm all
other causes shall be excluded before testing
driver according to testing interface
How to operate testing interface
• Remove frontal fender
• Start the testing interface software on the
• Inert the key to switch on the power.
• Remove the connector between instrument
connect the 4 pin connector of the testing interface
panel and driver (as illustrated in the left) and
with the driver connector and the other end
connects with the UBS connector of the computer.
Please install the testing interface software and
testing interface driver by first use.
software as illustrated in the following:
Testing interface connector
SC9004-EGC2-0000
SC9003-EGC2-0000
Driver
connector
Testing interface
wiring
Testing interface
connector
USB connector
LEV INTERFACE (TESTING INTERFACE)
NOTICE