E-Swin WE-O, Руководство пользователя, Страница: 31 / 64

31
13
14
15
17 16
NOTE:
After the session, small red spots may appear. This is a normal reaction, and the spots will clear rapidly.
y
STEP 6
END OF THE SESSION
• Press the stop/start button (icon n° 10 ).
• The fans will continue to run for approximately 10 minutes. Do not disconnect the mains
lead while the fans are still running. Amongst other functions, this ensures the correct
cooling of the optical components.
• Unlike the fans in the applicator, which will stop after a certain time, the fans in the base
will continue to run until the final disconnection of the mains lead of the device.
• Using the
Clean
spray (photo 13 ), clean the glass end of the applicator (optical guide).
To do this, apply the
Clean
spray in advance to a lint-free cloth (photo 14 ), then clean
the optical guide (photo 15 ).
• It is also possible to maintain the base in which the applicator is fitted (by rinsing in water,
ensuring that it is dry again by the time the applicator is re-fitted). To do this, release the
smoked black base by holding the two tabs on either side (photos
16 & 17 ).
REMOVING HAIR WITH