
E800 User Manual
Web:
Email: [email protected]
3.
Basic Operation
This part shows user some basic operations to start working with E800.
3.1
Insert SIM card
E800 supports network working mode. Open the cover and insert Micro SIM card.
3.2
Charge the battery
E800 is equipped with Type-C charger which support maximum 45w PD quick charge.
The capacity is 13600mAh, fully charge the battery will take 8 hours typically. The
battery indicator is red when charging, will turn green when fully charged.
3.3
Insert radio antenna
The antenna is required in radio working mode.
3.4
Measure antenna height
In order to get correct elevation value, we need to know the correct phase center
height of the receiver. However, it is almost not possible to measure the phase center
directly. Normally, the software will read the receiver antenna offset parameters.
Once user input the measurement height, software will calculate the phase center
height automatically. Typically, there are two ways to measure the height:
A: Slant height (to measurement line)
•
Centering and leveling the tripod on known point, then measure slant height from
the ground point to the arrow at the side of the receiver.
B: Pole height (straight height to device bottom)
•
Read the straight pole height
A: Slant height Measurement Line B: Pole height