e-survey E3L, Руководство пользователя

Страница: 36 / 116

SHANGHAI ESURVEY GNSS CO., LTD.
26
2. Do one of the following:
o
Manually set the orientation:
i. To enter MANUAL INPUT display, press F1 / 1 .
ii. Set backsight point, reflector height and Hz-direction (Azimuth).
iii. Press F1 ALL to trigger measurement. The display shows Data Saved
and Orientated .
o
Set the orientation with coordinates:
i. To enter COORDINATE ORIENTATION display, press F2 / 2 .
ii. Do one of the following:

Press F1 LIST , and select a point stored in the internal
memory.

Press F2 ENH , set the backsight point and coordinates of
north, east and H, and press F4 ENT .
iii. Set the reflector height.
iv. Press F1 ALL to trigger measurement. The display shows Data Saved
and Orientated .
5.2.1.4 Start Survey
It is used to start surveying with an unlimited number of points.
The principle is as follows:
To start survey, do the following:
1. To enter MEASURE display, in MEASURE SET display, press F4 / 4 :
2. Set the point ID, reflector height.