20
6.0 Application
6.1 Serial Programming Specifications (SPS), For Scan Engine
Default Setting
Baud rate
9600
Parity
None
Byte size
8
Com Port
2
6.1.1 View Button
Provides all the settings in the M300 Device, including Power, Prefix, Suffix, Linear, PDF417 and
Magnetic.
6.1.2 Set Button
Sends the settings to the M300 Device. Following each change in setting, the Set Button should be
activated.
6.1.3 Factory Button
Activation of the Factory Button will set the M300 Device to the default set-up and clear all the set-
tings (Power, Prefix, Suffix, Linear, PDF417 and Magnetic).
6.1.4 Revision Page
Show the applications, hardware configuration and serial number.
Figure 6-1 Revision Page
Application
NOTE:
All M300 Scanners are set to a default 9600 baud rate. This baud rate is required to remain at a
factory default in order to pass Bios startup test.
View
Set
Factory
Содержание M300
