E-Pill Vibrating 12 Alarm Pager Скачать руководство пользователя страница 8

Страница: 8 / 10

4. Count Down Timer Settings

The Timer can be set to countdown once, or set to repeat over and over.

Note 1.

A set alarm will signal in all other modes unless alarm switch (on side of unit)

is set to O (off). An alarm remains set after its time has passed, and will sound again
every successive day until it is erased.

Note 2

Set alarms are automatically organized in the order of next to go off, accord-

ing to the time of day. In other words, when you check your set alarms, ALARM 01
will be the next to signal, then ALARM 02…etc.

Note 3.

SNOOZE button

- When an alarm signals, press the light button to turn off

the alarm and engage the snooze feature; the alarm turns back on automatically after 5
minutes. You can only do this once with each alarm.

Erasing an Alarm

To erase an existing alarm, (a) use the

Mode

button to advance

to “ALARMS SET”; (b) use the

Enter

button to select the number of the alarm that

you wish to erase; (c) Press both the

Enter

and

Set

buttons simultaneously. This will

erase the alarm’s time, and therefore will erase the alarm itself.

Changing the Time of an Existing Alarm

To change the time of an existing

alarm, (a) use the

Mode

button to advance to “ALARMS SET”; (b) Use the

Enter

but-

ton to select the number of the alarm that you wish to modify; (c) Use the

Set

button to

change the minutes, then press the

Enter

button to shift to the hours, which you may

change with the

Set

button; (d) Press the

Mode

button to accept the change.

e-pill

Vibrating 12 Alarm Pager | www.epill.com

When the meeting timer is in operation, it does not show countdown. It only
shows "ON" and the total meeting duration.

Once a meeting time is started, it will repeat every 1/2 hour for durations of 10-
30 minutes, and repeat every hour for durations of 31-60 minutes, and repeat
every other hour for durations of 61-120 minutes.

TIP #1

: The meeting time

that was last programmed is
saved when you exit. When
you return to this mode and
wish to re-use this meeting
time, follow these steps.

TIP #2:

ERASE a meet-

ing time

go to MEET-

TIMER, press

Enter

, press

Set

; this will erase the last

used meeting time and allow
you to set a new time by
pressing

Set

again. Hold

Set

button down for rapid count-
ing.

e-pill

Vibrating 12 Alarm Pager | www.epill.com

Содержание Vibrating 12 Alarm Pager











Результаты поиска

Содержание Vibrating 12 Alarm Pager

Отзывы:

Похожие инструкции для Vibrating 12 Alarm Pager

Бренды по названию

Популярные бренды

E-Pill Vibrating 12 Alarm Pager, Руководство по эксплуатации

Результаты поиска

Содержание Vibrating 12 Alarm Pager

Отзывы:

Похожие инструкции для Vibrating 12 Alarm Pager

Бренды по названию

Популярные бренды