NOTES:
e-pill
®
Vibrating 12 Alarm Pager | www.epill.com
18
3
12-Second Delay
When entering a timing or adjustment mode, you have twelve seconds to enter a new
setting. If you make no change within 12 seconds, the display will revert back to the
mode name – if this happens, simply press the ENTER button again to return to the
mode being set and begin programming again. One push of the light button and the light
stays on for 10 seconds and then turns off automatically. It cannot be turned off manu-
ally.
Key Lock for Timer, Meeting Timer and 12 Alarms
To protect settings from accidental erasure (by accidental button presses) the Vibrating
Pager Reminder has a “button auto-lock” feature for the Timer, Meeting Timer, Custom
Timer and the 12 Alarms. The “button auto-lock” only becomes active when one of
these three timer functions is programmed. To override this feature and change a set-
ting, both the ENTER and SET buttons must be pressed
simultaneously
(see operation
instructions for details).
Meeting Timers – How to start the Timers
When you enter into the “TIMER SET” and “MEET-TIMER” modes by pressing EN-
TER button, one additional button-press is required before the timer can be started. For
example, after entering into one of these timer modes by pressing ENTER, you may see
a setting on the display that you would like to use. Simply press the MODE button and
the timer will begin.
Care of Your Vibrating Pager Reminder
Batteries
Your Vibrating Pager Reminder uses one alkaline AAA battery. Rechargeable batteries
of any type are not recommended. If you need to replace the battery and no alkaline bat-
tery is available, you may use an ordinary or “heavy-duty” traditional carbon-zinc bat-
tery. These types will work, but the useful life will be shorter. Never use a battery that
shows signs of leakage. How long a battery will last depends upon how often the light
and the alarms are used - these functions consume the most electricity from the battery.
An alkaline battery should last for approximately 3-9 months. The e-pill Vibrating
Pager will retain your programming for a
short time
(30 seconds to 1 minute) while
you change your battery.
Keep your Vibrating Pager Reminder safe
Ensure that your Vibrating Pager Reminder is not exposed to excessive heat. Avoid
keeping the e-pill in direct sunlight, near a radiator, in the glove compartment of your
car, or in other hot places. Your Vibrating Pager Reminder is neither waterproof nor
water-resistant. Your warranty does not cover damage caused by heat, a leaking battery,
or liquids.
Cleaning
The Vibrating Pager Reminder, and its garment clip, may be safely cleaned with ordi-
nary isopropyl rubbing alcohol (do not use on the leather pouch). Liquids must not be
allowed to enter the device.
e-pill
®
Vibrating 12 Alarm Pager | www.epill.com
