E-one clinic, Руководство пользователя

Страница: 42 / 52

This plate is made from a material that is resistant to flashes. It
enables you to cover an area on which the flash must not be used
(e.g. tattoo). The glass tip of the applicator (optical guide) can also
be placed in the middle between the
and the skin.
USING THE
46
It is used to mark out the area to be treated. The pencil work
must be completed before applying the
.
NOTE: Only this pencil can be used to mark out the areas to
flash. It has been tested not to react to the flashes. Other
pencils may lead to skin burns if the flash is used
on the line drawn on the skin.
Made in China
It should be stored at room temperature. It is used in thick layer and
is applied gradually as the session progresses so that it does not
dry on the skin. Once used on the skin and flashed, the
should
under no circumstance be collected and reused on another area. A
gel that has been flashed is likely to lead to an alteration of its optical
characteristics. At the end of the session, it must be
removed from the surface of the skin with a wet towel
or by taking a shower.
It should be from the optical parts and from the mobile
part of the applicator with the help of a slightly damp
cloth followed by the spray
.
Made in Europe
They must be worn by all those present at the time of the flash.
They enable you to mark out
the areas that
must never be
flashed (example: eyelashes,
eyebrows...)
Made in China
Active Ingredients:
Methylisothiazolinone and Methylchloroisothiazolinone (MCI/MI ). Their quan-
tity, in regards to the 3:1 ratio, is 0.0008 %. Does not any contain formic alde-
hyde. Keep away from light - External use only. Do not use on injured, burnt or
infected skin.
Made in France
You can find all these products on our website