manualshive.com logo in svg

E-Mu Mo'Phatt Keys MK-6, Руководство по эксплуатации, Страница: 202 / 270

Поделиться
Скачать
E-Mu Mo'Phatt Keys MK-6 Скачать руководство пользователя страница 202

192 

  E-MU Systems

Save/Copy Menu

Copy Preset Bank

Sound 
Authoring

This is a special purpose function to be used with the Flash sound 
authoring feature. Flash Sound SIMMs created on an EOS Ultra sampler can 
be used as a custom MK-6 bank. Presets are then created in a User bank. 
When the bank of presets is finished, it can be copied, using this function, 
to the Flash SIMM. Flash SIMMs contain two separate memory locations. 
One of these memories contains the sound samples and the other memory 
can hold four banks of 128 presets.

For instructions on how to remove and replace ROM SIMMs, 
please see “Installing Sound SIMMs” on page 238

.

The four sound SIMM sockets in MK-6 are marked 0-3. 

The destination 

Flash SIMM must be placed in SIMM socket 1. 

  

To Copy a User Bank to Flash:

1.

Make sure a Flash SIMM is inserted into the extra MK-6 SIMM socket.

_

_

_

_

If there is no Flash SIMM 

in the unit, the error message, 
“Requires Flash SIMM” will be 
displayed.

2.

Press the 

Save/Copy

 menu button.

3.

Rotate the data entry control to select the 

“Copy User Bank”

 function 

shown above.

4.

Move the cursor to the

 “From”

 field and select the User bank that you 

want to copy to the Flash SIMM.

5.

Move the cursor to the 

“To”

 field and select the Flash bank that you 

want to contain the User bank.

6.

Press 

Enter

. The Enter LED will flash and the screen below appears.

7.

Press 

Enter

 again to confirm. The following screen appears:

8.

The Flash presets cannot be used until MK-6 is rebooted (power off then 
on). 

Reboot

 the MK-6 and verify that the new Flash bank has been 

properly copied.

Copy User Bank 
to Flash

COPY  USER  BANK  TO  FLASH

From: User

0

         To: Flash

2

Press   ENTER   to   Overwrite

Flash  SIMM  Presets

COPYING  USER  BANK  TO  FLASH

Done.  Please  Reboot  Now.

Содержание Mo'Phatt Keys MK-6















































































































































































































































































Отзывы:

Нет отзывов