160
E-MU Systems
Save/Copy Menu
Copying Information
Rename Flash SIMM
This utility allows you to rename the Flash SIMM and change its ROM ID
number. Flash SIMMs can have any five letter name you choose. Each Flash
SIMM in a B-3 unit must have a unique ROM ID number (106-119).
The field in the upper right corner selects between multiple Flash SIMMs. If
only one Flash SIMM is installed, the field cannot be modified.
The ROM ID is the MSB
of the MIDI Bank Select
command used to select the
ROM bank.
1.
Make sure a Flash SIMM is inserted in a B-3 SIMM socket.
_
_
_
_
If there is no Flash SIMM
in the unit, the error message,
“Requires Flash SIMM” will be
displayed.
2.
Press the Save/Copy menu button.
3.
Rotate the Data Entry Control to select the “Rename Flash SIMM”
function shown above.
4.
Move the cursor to the “New Name” field and rename the SIMM using
the Data Entry Control to select the letter and the cursor keys to select
the position.
5.
Set the ROM ID number for the SIMM. It doesn’t matter which number
you choose as long as the same number isn’t used in another SIMM.
6.
Press Enter. The following screen appears and the Enter LED will be
flashing.
7.
Press Enter again to confirm or any other button to abort. The
following screen appears:
8.
The Flash presets cannot be used until B-3 is rebooted (power off then
on). Reboot the B-3 and verify that the new Flash bank has been
properly renamed.
RENAME FLASH SIMM Flash
New Name: Drums ID: 110
Press ENTER to Update
Flash SIMM data
CHANGING SIMM NAME & ID
(takes about 2 minutes)
Содержание B-3
