![background image](http://html2.mh-extra.com/html/e-mu/404/404_tutorials-manual_3121910005.webp)
Tutorials
Introduction
E-MU 0404 PCI Digital Audio System
5
Tutorials
Introduction
This guide contains step-by-step walk-throughs of basic recording operations using
PatchMix DSP and a variety of popular software applications. We encourage you to
perform the steps on your computer as you read so that you become familiar with the
process. The first tutorial only takes about half an hour to complete, by which time you
should be comfortable with multitrack recording using your new Digital Audio System.
E
Important Note:
If you need additional
help with the bundled
applications, please see
the “Technical Support
Information” pdf located
in the “Creative
Professional, Documents”
folder.
Once you’re up and recording, you can find detailed information on all aspects of
PatchMix DSP and your E-MU interface hardware in the pdf Owner’s Manual.
Before you Begin
• You should have already installed the E-MU hardware and software on your
computer according to the instructions in your printed “Getting Started” manual.
• You should hear the computer sounds coming out of the E-MU hardware and your
speakers when you play a CD or an MP3 using Windows Media Player. If not, make
sure your E-MU hardware is properly connected according to the diagrams in the
“Getting Started” and “Owner’s Manual”.
• A source of audio should be connected to the inputs (instr./tape/cd/MP3 player).
The Product Default Session
Before we begin, you should verify that the
Product Default
session is selected. This
session has everything connected for you. A
Session
is a stored connection/mixer setup.
You can create your own custom Sessions later on if you wish.
To Open PatchMix
1.
Left-click once on the E-MU
icon on the Windows
System Tray.
2.
The PatchMix DSP mixer
window appears.
3.
The
Product Default
session
contains two Aux 1 Sends as
shown at right. If you’re not
sure the Product Default
session is loaded, see the
“Comment” box in the
“Session Settings”.
4.
If the Product Default
session is NOT selected, click
once on the
Open Session
button and select “Product
Default” from the list.
5.
Close PatchMix by clicking
the “X” in the upper right
corner.
6.
OK, now we’re ready to
proceed!
f
Verify that both Aux 1
Insert slots are filled
with Send Inserts as
shown.
Open Session
Close PatchMix
Click Here to Open PatchMix
Session Settings