8. Fault code
9. Function settings
Press and hold the gear plus button for 2s to enter the setting mode.
In setting mode state, short press gear plus button to switch setting items, short press gear minus to switch function
P0 switch mile/km;
P1 switch TRIP / ODO;
A0 does not cruise, A1 cruises;
b0 zero start, b1 non-zero start.
Press and hold the gear plus button for 2s to exit, or exit without operation for about 40s.
10. Forced shutdown and automatic shutdown
Press and hold for 8s to force shutdown.
No operation for 10 minutes to automatic shutdown
11. Cruise and Assisted start
Keep the throttle for about 6s to enter the cruise. The cruise icon lights up and the buzzer sounds. Assisted start,
the motor will start at a initial speed, otherwise it will not start.
12. Current limiting
Motor current limit 16A.
13. Speed
14. Buzzer
There is music when scooter is on and off. There are sounds when you press the plus and minus keys and turn on the
headlights. When the battery is low, the buzzer sounds 5 times.
Code
E1
E2
E5
E6
E7
E8
Failure
Communication failure
Hall fault
Voltage is too low (31V)
Stall protection
Throttle abnormal or speeding
Hardware overcurrent
Gear
1
2
3
Speed (KM / H)
10
15
20
