UC306W User Guide
UCx 4.5
11-Feb-2015
Page
of
15
30
Copyright © 2014 E-Metrotel
Global Inc.
Parameters
Description
SSID
This option is to set the AP's SSID. Input the network name (32 alphanumeric characters
maximum), and press the soft key on the left.
Set Security
This option is to set the security parameters of the WIFI wireless network. You can choose
from Open System, WEP key, WPA-TKIP, WPA-AES. WPA-Auto or WPA2.
If WEP key is chosen, you will need to set the WEP Key.
If WPA encryption is chosen, you will need to set the WPA/WPA2 Key.
WEP Key
setting
If the security mode of AP config file is WEP key, use this option to set the WEP key.
For 64-bit, make sure the WEP key is comprised of 5 ASCII characters or 10
hexadecimal characters.
Note: Settings of WEP key may be different, depending on the settings of the WIFI
wireless network.
If the WIFI wireless network only supports one fixed hexadecimal-character key, you
shall input the same WEP key as the phone's.
If the WIFI wireless network supports both ASCII and hexadecimal WEP keys, you
may input either ASCII or hexadecimal key.
WPA/WPA2
Key Setting
If the safety mode of WIFI wireless network is WPA/WPA2 PSK, use this option to set
WPA/WPA2 key.
Input the
value, and press the soft key on the left to confirm.
WPA-PSK
Activate
Not used
The matrix below specifies which authentication modes are supported:
Security Mode
Authentication/Cipher Mode Supported
Open
n/a
Yes
WEP
Open 64-bit
Yes
WEP
Open 128-bit
No
WEP
Shared Key
No
WPA-Personal
TKIP/AES/Auto
Yes
WPA2-Personal TKIP/AES/Auto
Yes
4.4.2 Signal Protocol