H900 Series Cellular Router User Manual
Fig. 3.3.7.1-3: NAT&DMZ Setting Interface
Route Mode configuration parameters include:
【
Interface
】
:On selected interface, the source IP of packets pass through H900would
not be replaced to H900’s IP, the destination machine can see the source IP directly.
Not
Nor
e:
mally you may not need this option except for some certain application.
2.
DMZ setting
Select the “DMZ” option to go to the following configuration interface:
Fig. 3.3.7.1-4: DMZ Setting Interface
DMZ configuration parameters include:
【
Outside Interface
】
: Set the interface on which the DMZ function acts.
【
Inside Address
】
: Set the IP address of the host assigned by DMZ record.
3.
NAT setting
