H900 Series Cellular Router User Manual
SIM Card List
【
SIM Status
】
: Set the dual sim use mode.
MAIN BACKUP – set one sim as main, the other sim for backup if the first sim failed to
the connection. For example, suppose SIM1 is the initial working sim, and failed later.
After the “SIM Card Timeout” time, SIM2 will try to dial to network. If some time later
SIM1 can work again, then router will switch to SIM1 again.
USE SIM1 – set the sim1 be used only
USE SIM2 – set the sim2 be used only
MUTUAL BACKUP – set two sims working for backup each other. For example, suppose
SIM1 is the initial working sim, and failed later. Then SIM2 will automatically dialup.
After sometime, suppose SIM2 failed to connection, SIM1 will automatically dialup.
Basic Settings
【
Auto-Dialup
】
: Set the account number of 3G network service provided by ISP.
【
Module Modem Chat Script
】
: Set the dial-up script chatting with Module Modem.
Select the “Customize”, and enter the dial-up script chatting with Module Modem in the
input box. Normally you may select”Default”.
【
Service Code
】
: Set the name of cellular network service provided by ISP.
【
APN
】
: Set the APN of the internet access service provided by ISP.
【
User Name
】
: Set the account number of 3G network service provided by ISP.
【
Password
】
: Set the password of account number of 3G network service provided by
ISP.
【
Module Modem Initial Script
】
: Set the initial script of Module Modem dial-up. Select
the “Customize”, and enter the initial script of Module Modem dial-up in the input box.
Normally you may select “Default”.
【
Advanced setting
】
: Configure advanced parameter by dialing protocol.
Not
“Em
e:
bedded Modem” & “Module Modem” both mean the Modem embedded in H900.
In the “Advanced setting” tab, it contains “PPP Advanced Settings” & “Internet
Connection Type Settings”, the interface of “PPP Advanced Settings” is as below:
