E-Lins H685m Series Router User Manual
E-Lins Technology Co.,Limited
Tel: +86 (755) 33231620
E-mail:
www.szelins.com
Subnet Mask: 255.255.255.0
Remote
Remote
Remote
Remote LAN
LAN
LAN
LAN
Select: choose input
IP Address: input remote IP address range, for example the VPN server router IP is 192.168.10.254, so here
we put 192.168.10.0
For the sever IP (remote IP), you can fill in the server IP address or server’s DDNS.
Subnet Mask: 255.255.255.0
password:
password:
password:
password:
the same with in the server, this is unique with the user name from the VPN server
router.
Dynamic
Dynamic
Dynamic
Dynamic IP:
IP:
IP:
IP:
Dynamic IP means opposite maybe Dial-up connection, so no input IP Address.
After configuration, save it and re-power on the router. Then the router will connect the VPN by IPSec.
Then you can find at “VPN—IPSEC status” the similar following pictures, which means the IPSec VPN is
connected successfully.
4.2.2
4.2.2
4.2.2
4.2.2 C
C
C
Config
onfig
onfig
onfigure
ure
ure
ure Router
Router
Router
Router as
as
as
as IPSec
IPSec
IPSec
IPSec S
S
S
Server
erver
erver
erver
Notes: this is not recommended. We recommend use CISCO VPN Server Router as a VPN server.
Configure 3g Router parameters as below.
Choose “Server”, and click “Add VPN Setting” button to enter.