e-LinkCare UBREATH PRO PF680, Руководство пользователя

Страница: 51 / 59

49
Maintenance
5.1 Care and Cleaning
The
UBREATH® PRO
Spirometer System does not require regular special
maintenance or cleaning. A cloth dampened with water and a mild detergent
solution can be used to wipe the outside of the device. Take care to avoid getting
liquids, dust or other foreign bodies into the device through the flow sensor or
data ports. It is recommended that you store the device back in the case after
each use.
The operations to perform periodically are:
 Changing the UBREATH® PRO Disposable Flow Transducer between tests.
 Charging the battery with safety.
The follow precautions are needed to pay attention to:
 Avoid exposing the UBREATH® PRO Spirometer System to direct sunlight
during use;

Avoid operating the spirometer in dusty conditions or near to heating
appliances or radiators;

Do not keep the spirometer in a damp place or expose it to extremes of
temperature;
 Do not direct the transducer holder towards a strong light source whilst
operating the spirometer;

Check the AC charger for compatibility with local power rating.
 The UBREATH® PRO Spirometer System is a precision electronic instrument.
Please handle it with care.
5.2 Replacement Items
The UBREATH® PRO Spirometer System is a device that requires very limited
maintenance, however the follow accessories need to be replaced if needed.
 UBREATH® PRO Disposable Flow Transducer

Thermal printing paper roll
 Rechargeable battery
Despite the thermal printing paper roll which can be bought from your local
general medical suppliers, the UBREATH® PRO Disposable Flow Transducer and
Rechargeable battery are exclusively from e-LinkCare . Contact your local
distributor to enquires from them.
WARNING: The maintenance operations set forth in the User’s Manual must
be carried out carefully. Failing to observe the instructions contained in the
manual may cause errors in measurement or in the interpretation of
measured values. Modifications, adjustments, repairs, and reconfiguration