2
B. Procedures
0. Practice to feel the press of the
setup button
with setup stick (
A click
)
1.
Touch & hold
a button & press the
setup button
(
press & let go
), LED flash
3 times
means it’s under
setting mode
now. You have
7 sec.
to input command by
RC-07.
2. Pick up an
RC-07
, which has
preset
a
scene,
point its
IR Digital Output
to the
Setup button
, within
5cm
distance &
5 Sec.
at least.
3. When the
LED flash twice
, it means the process is completed, please put away
RC-07
.
The
2-Way
macro input is done.
4. Continue to set the next key or test the key function you’ve just set.
C. Control: Touch the key to control in 2-Way mode.
2. 2-Way SW Setup
A. Preparation:
Pre-set a
Macro
as a single action as
[X], [ON]
on a scene button of
RC-07.
- [X] is the target light no. to be controlled as 2-Way
; ex.: the target light no. is
“3”
.
then we need to set a scence
[3] [ON]
in a scene button
on
RC-07
.
(please refer to the user manual of
RC-07
to obtain the detail setup procedures.)
LC-X0T Setting
3. Scene Control
Setup:
A.
Preset a scene, which contains
36 actions or less
;
(ex.: “
Light no.1 – ON”
, “
Light no.2 – ON”
…, 36 actions are the most).
Follow the procedures as “
2-Way
Setup” to input this macro to any key of
LC-X0T
, to accomplish the setting.
B. Control:
Touch a key to start a
macro
& touch any key to
break off
the action.
※
Please see appendix for the details to take apart / dress up the front panel.
Sense Zones & DI key’s Descriptions
