(1)Long press to enter main menu on temperature/pressure page.
(2)Short press to switch to pair page and long press to enter it.
(3)Short press to select pair 2 mode and long press to enter setting of pair 2.
(4)Short press to select desired pairing tire senor and long press
to start pairing process following sequence of RF/RR/LR/LF.
Ɂ
Pairing requires actual tire pressure change for up or down
over 2 psi,0.1 bar or 10 kPa within 30 sec. to activate the
paring process. Please flat or inflate the tire corresponding
to pairing sequence.
(5)Return:
a. Pairing is done.
b. During pairing process, short press to return and long press
to cancel pairing.
c. When stopping the pairing suddenly,the pairing process will
start from RF.
d. Long press for 5 seconds to go to the main menu.
[1]
PAIR 2:
Once 4 vehicle tire sensors are replaced; to pair the new tire sensors with receiver module
follows 4 tires pairing process.
11
