e-Joe Gadis, Руководство пользователя

Страница: 14 / 18

9
The error code is corresponding with the fault definition
Error code Definition
9 Communication display receiving error
21 Current error
22 Throttle error (Start detection)
23 Motor no phase position
24 Hall error
25 Brake error (Start detection)
MAINTENANCE
Like any other mean of transportation, electric bicycle and its components are subject to wear and tear. The rate of wear
depends on care and maintenance and the way of use (mileage, terrain, weather conditions, etc.). The use of a bicycle in
competitive events, aggressive riding, riding on severe terrain/climates, riding with heavy loads, commercial activities and
other types of non-standard use can dramatically shorten the life of the bicycle and its components. Be sure to use your
bicycle for its intended purpose only and to follow any assembly and maintenance instructions.
● IMPORTANT! Do not attempt to open the casings of the battery, motor, or controller; it could be dangerous and will
void any warranties by doing so. If you experience a problem, please contact our service department or your local
retailer.
● Wheel spokes should be adjusted every 300 miles of riding.
● Handlebar and saddle posts should never be raised beyond the maximum indicated by the safety lines around the
tubes.
● Your bike has a rear derailleur that will automatically tension your chain. However, if the chain becomes loose or
frequently comes off the front cog, you can easily adjust the chain tension by loosening the rear axle nuts slightly
and adjusting the tension bolts. Make sure that the chain runs freely and retighten the axle nuts.
● Disc brake calipers, rotors, and brake pads get extremely hot after use. Do not touch these parts after a ride and be
sure to allow some time for the brake system to cool down before attempting the service.
● Leaving a bicycle standing in the open and/or not using it for longer periods of time (more than 3 months) may be
subject to increased wear through weathering and deterioration. You should have your bicycle and its components
checked periodically by your dealer for indicators of stress and/or potential failure, including cracks, corrosion,
deformation, dents, paint peeling, and any other indicators of potential problems, inappropriate use or abuse. These
checks are important to ensure all components function safely and reliably and to help prevent any accidents or
injuries to the rider.
WATER
•
Your electric bicycle is rain and splash resistant. Please use caution; do not operate your bicycle under very
bad/heavy weather conditions.
● The electric components, such as the motor, battery, and controller, MUST NOT be submerged in water.
● To prevent rust or corrosion, dry off bicycle and components after riding in wet weather and store bike and battery
in a dry location.
● To avoid electric shock and damage to your product, do not charge the device while it is wet or in an area where it
could get wet. Do not handle bicycle, scooter, charger or cords with wet hands while charging.