4.
Making a measurement
a.
Press the MEASURE
key to view the Main Measuring Screen including CO2 ambient temperature,
barometric pressure, & relative humidity.
5.
Turn Pump On/Off: Press the PUMP
button to Turn Pump On & Off. When Pump is OFF, no sample is being made
6.
Storing Data to Internal Memory (Store Data Points or Long-Term Periodic Tests)
Refer to Chapter 7 in Manual
a.
Press Data Storage Button
b.
Select “Store Current Buffer” to store a single data point or one of the other Buffer Storage options depending
on your needs. If you want to store data in a different location, use the UP, DOWN, & OK keys to select a new
tag. Empty tags show the word empty.
c.
Select “Review Buffer” to view previously stored data
d.
Select “Name Buffer” and “Erase Buffer” as needed
7.
START PERIODIC DATA STORAGE: This will turn on the periodic (long-term) store function. In this mode, the unit will
continuously store data at an interval displayed on the next line.
a.
In the Data Storage Menu, Highlight “SELECT INTERVAL”: The time between each store is set here. This can
range from 10 seconds to 60 minutes.
b.
To START data storage: Highlight and Press OK to START PERIODIC STORE.
c.
To STOP data storage: Highlight and Press OK to STOP PERIODIC STORE.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
