Master and slave setting: Operated as a MASTER, it can beused to control other SLAVE
devices with the same effect.
Press
key to enter main menu,it will show message
, press
key to
"ENTER"
[Master]
"ENTER"
confirm, use
or
key to select
or
, then press
key to
"DOWN"
"UP"
[Master Off]
[Master On]
"ESC"
confirm and return to main menu;
Master
Off
ENTER
DOWN
UP
ESC
or
Master
Off
Master
On
or
DOWN
UP
or
ENTER
When the DMX512 signal connected together,other lights keep same control setting with
the master light.
*
9
Installation :
Shown in the figure, loosen the handle, to
move it forward or backward to get needed
spot size, then tighten the handle .
4.Zoom:
This equipment is dimming is 0-100% linear dimming, which can be adjusted through
DMX512 signal, in the absence of DMX signal can be adjusted through the device
menu"ManDim".But the dimming DMX512 signal is priority, when signal input, manual
dimming is invalid, in order to realize manual light, you must disconnect DMX-input.
5.Dimmer:
Before replacing the fuse, unplug mains lead.
6.Replacing fuse:
Procedure:
Step 1: Unscrew the fuseholder on the rearpanel with a fitting screwdriver from the
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Installation :
1.Description of the keys:
Operation :
housing (anti-clockwise).
2.Basic setting:
The display will show address and other information when the unit is powered on.
Display
ON/OFF
ON
OFF
Using AC power jack :This
light
can
be
powered
by
AC power supply. Use a
100~240V(50/60Hz) adapter (included) to
connect the light with the AC power jack.
Insert connect the light with AC power
supply. Switch the power on, the power
indicator flash once and the video light giving
out light.
10
Address setting: DMX address is a DMX channel where your light starts synchronizing in the
512 channels available. By setting it up, the light will respond to any signal sent to this address.
Press
key to enter main menu, it will show message
, press,
key to
"ENTER"
[Dmx Adr 001]
"ENTER"
enter, use
or
key to select required address
and press
, to confirm
"DOWN"
"UP"
[001 - 511]
"ESC"
and return to main menu;
ENTER
Dmx Adr
001
ENTER
DOWN
UP
ESC
or
DOWN
UP
or
Dmx Adr
001-511
Setting when unit loss signal: When DMX signal lost,can choose off the light or keep the last
control setting.
Press
key to enter main menu,it will show message
, press
key to
"ENTER"
[Dmx Loss]
"ENTER"
confirm, use the
or
key to select
or
, and press
to confirm and return
"DOWN"
"UP"
[Off]
[Hold]
"ESC"
to main menu;
Dmx Loss
ENTER
DOWN
UP
ESC
or
Dmx Loss
Off
Dmx Loss
Hold
or
DOWN
UP
or
ENTER
Dmx loss off: When the DMX signal is lost,it will be black out.
Dmx loss hold: After DMX signal is lost,remember the last control setting.
*
