background image

3

EN

Designed by aerobatic world champion Quique Somenzini, the Ultra Micro extreme (UMX) Beast

® 

3D BNF 

Basic is a thrilling small-scale recreation of one of the most awe-inspiring airplanes ever created. At its 
heart is the revolutionary AS3X

 System built in to help provide you with a true 3D experience, the ability 

to fl y indoors, and handle windy conditions outdoors. The added punch of its stronger 2500Kv, 180BL 
outrunner motor delivers an outstanding thrust to weight ratio. But beyond the capability to better perform 
all-out 3D, you will fi nd that the Beast 3D with AS3X gives you unmatched precision in its size-class and 
remarkably stable handling. Surprisingly, all of the performance possible from the UMX

 Beast 3D BNF 

Basic only requires basic radio programming. And even though your new model is fully assembled, please 
read and follow this manual completely to be sure you’re ready to take full advantage of what this awesome 
RC aircraft has to offer.

To register your product online, go to www.e-fliterc.com

Table of Contents

Specifi cations .......................................................3
Prefl ight Checklist .................................................4
AS3X

 Stabilization ..............................................4

Low Voltage Cutoff (LVC) .......................................4
Transmitter and Receiver Binding ..........................5
Installing the Flight Battery ...................................5
Arming the ESC ....................................................6
Control Direction Test ............................................6
Control Centering  .................................................6
Settings for Control Horns .....................................7
Dual Rates ............................................................7
Adjusting Center of Gravity (CG) ............................7

Flying Tips and Repairs .........................................8
Additional Safety Precautions and Warnings ..........9
Service of Power Components ............................10
Troubleshooting Guide ........................................11
Troubleshooting Guide (Continued) ......................12
Warranty and Repair Policy .................................13
Warranty and Service Information .......................14
Compliance Information for the European Union ..14
Parts Contact Information ...................................54
Replacement Parts ..............................................54
Optional Replacement Parts ................................55

EFLU4864 DSM2 6Ch Ultra Micro 
AS3X Receiver BL-ESC

BL180 Brushless Outrunner 
Motor, 2500Kv

(4) 2.3 g Performance Linear Long  
Throw Servo

Battery:

 180mAh 2S 20C Li-Po

Battery Charger:

 2S 7.4V Li-Po

Recommended Transmitter:

 

Spektrum

 DSM2

/DSMX

® 

full range 

with dual-rates (DX4e and up)

Needed to Complete

Installed

15.7 in (400mm)

14.7 in (372mm)

2.0 oz (58 g)

Specifi cations

Содержание UMX BEAST 3D




















Отзывы: