14
E-flite Taylorcraft ARF Assembly Manual
Joining the Wing Panels
Required Parts
Wing (R&L)
Wing joiner
Wing dowel (2)
Skylight window
Wing bolt brace
2mm x 6mm sheet metal screw (8)
Required Tools and Adhesives
Pencil
30-minute epoxy
Mixing stick
Epoxy brush
Hobby knife w#11 blade
Felt-tipped pen
Medium CA
Low-tack masking tape
Medium grit sandpaper
Paper towels
Rubbing alcohol
#1 Phillips screwdriver
1. Use a pencil to mark the wing panel and joiner so you
can return the joiner into the orientation in which it was
fit into the wing panels.
2. Slide the wing joiner into the wing panel. It may be
necessary to sand it lightly for the best fit.
3. Use a pencil to draw a line on the joiner against
the wing.