19
E-flite Pitts Model 12 15e ARF Assembly Manual
2. Press the landing gear filler block in position. This will
transfer the location of the screws onto the block.
3. Use a hobby knife to trim the filler block to clear
the heads of the three screws holding the landing gear
to the fuselage.
4. Use 6-minute epoxy to glue the filler block in position
on the fuselage.
5. Slide a 3mm x 30mm machine screw through the
wheel. Use a 3mm wheel collar and setscrew to secure
the screw in the wheel. Use threadlock on the setscrew to
prevent it from vibrating loose.
