Introduction
The Cap 232 BP 3D combines the sturdy construction of a
balsa/light-ply airframe with the uninhibited 3D capability
of a lightweight profile park flyer. It’s all made possible
by its intelligently engineered, open structure design that
keeps weight to a bare minimum while providing all the
structural integrity of a real wood airframe. This feather-
light construction, combined with a high-output brushless
motor, will provide spine-tingling 3D and freestyle
performance that will let you really push the limits. And it
comes from the factory 90% built and covered in genuine
UltraCote
®
and UltraCote Light so you can be up and
flying in no time
Specifications
Wingspan:
35.5 in (900mm)
Length:
35.5 in (900mm)
Wing Area:
425 sq in (27.5 sq dm)
Weight w/o Battery: 13–14 oz (370–400 g)
Weight w/ Battery: 15.5–17 oz (440–480 g)
Using the Manual
This manual is divided into sections to help make assembly
easier to understand, and to provide breaks between each
major section. In addition, check boxes have been placed
next to each step to keep track of each step completed.
Steps with a single circle (
) are performed once, while
steps with two circles (
) indicate that the step will
require repeating, such as for a right or left wing panel,
two servos, etc.
Remember to take your time and follow the directions.
